Guide

A short, practical guide to primer, mastic and bitumen: what they are for, how to choose and how to apply them.

This is general information, written in our own words from open technical data sheets and standards (for example GOST 6617-76). For exact instructions see the product label or ask our specialists.

Bitumen primer: why it is needed

Primer is a liquid coat applied to the base before a bitumen material. It soaks into the surface, strengthens it and helps the next layer (mastic or roll) bond well. Open technical data sheets describe primer as a solution of petroleum bitumen in organic solvents that penetrates well and dries quickly. Water-based types also exist. The composition of our product is stated on its label.

  • The base must be clean, dust-free and free of oil
  • Apply the primer evenly with a brush or roller
  • Let the primer dry completely before the next layer (drying time is on the label)
  • Primer is used under roll materials and under coating waterproofing
  • Absorbent bases (concrete, cement screed) may need more primer

Bitumen mastic: application and storage

Mastic is a ready-to-use bitumen waterproofing compound. It protects foundations, basements, roofs and buried structures from moisture and is also used to glue roll materials.

  • Prime absorbent bases first
  • Apply with a spatula or brush; one layer is usually no thicker than 2 mm
  • For a thick coat, apply several layers, each after the previous one has dried
  • Consumption depends on the product and the base: follow the label
  • Store in a dry, ventilated place away from the sun and follow the rules for flammable materials

Construction bitumen BN 90/10

Construction bitumen is made by oxidising petroleum residues with air. The BN 90/10 grade is hard: a high softening point and a small needle penetration. It is used in roofing and waterproofing and to glue roll materials made with oxidised bitumen.

  • GOST 6617-76 norms for the BN 90/10 grade: softening point 90–105 °C
  • Needle penetration at 25 °C: 5–20 (in 0.1 mm units)
  • Flash point: at least 240 °C
  • These are the grade’s standard norms; ask us for the documents of a specific batch

What is inside bitumen

Bitumen is a complex mixture of oils, resins and asphaltenes. Roughly, oils make up 40–60 %, resins 20–40 % and asphaltenes 10–25 %. Under a microscope the asphaltenes appear as dense dark regions spread through an oily medium. This structure gives bitumen its viscosity and water resistance.

Bitumen sample (computer-drawn image)
Bitumen sample (computer-drawn image)
Schematic view under a microscope
Schematic view under a microscope

Which material for what

A quick guide to choosing the material.

  • Roof, terrace: primer, then roll material
  • Foundation, basement: primer, then mastic
  • Gluing a roll to the base: construction bitumen or mastic
  • Buried metal and concrete: mastic

Safety and storage

Bitumen materials are flammable, so store and use them with care.

  • Keep away from open flame and heaters
  • Ventilate the room and wear gloves and goggles
  • Keep containers closed and out of children’s reach
  • Choose the working temperature according to the label

Have a question?

Our specialists will suggest the material and quantity for your site.

Send a request